Product Description
This electric powered winch is ideal for indoor applications such as pulling wire through conduits or lifting equipment.
It can lift loads of 250 kg in a single line and a block and tackle system will increase the lifting capacity to 500 kg.
For lifting purposes, it is equipped with a rope grabbing system which will hold a load in position; allowing the operator to work safely. The electric motor is activated by simply pulling on the rope. As soon as the operator stops pulling, the drum stops rotating, preventing rope damage. For the operators safety, it is equipped with a rope grabbing system which will prevent the rope from sliding inadvertently. The PCT1800 is recommended for situations when gas-powered (petrol) winches cannot be used and is a good alternative when noise is an issue. *Note: One (1) anchor polyester sling 60 mm x 2 m is always included with every winch. Maximum pulling force with installed drum : 1808 lbs. Maximum pulling force with optional drum: 2205 lbs. Rated lifting capacity with installed drum: 551 lbs. Rated lifting capacity with optional drum: 551 lbs. Engine/Motor : AC Electric Baldor TEFC 115/230 VAC - 1 ph - 3/4 HP - 60 Hz. Gear box and gears : Aluminium alloy gear box. Heat treated 3 stage spur gears. Shafts mounted on ball bearings. Oil bath lubrication. Gear ratio : 110:1. Brake : Anti-reversing needle bearing. Clutch : N/A - Direct Drive. Drum turns with engine idling : No idle on electric motors. Work cycle : 25% (15 min./hour to prevent motor overheating). ANCHOR Included : Polyester sling 60 mm x 2 m (PCA-1260).
