Product Description
Conquer the dust problem in your workshop with iVAC's automated dust control system! Connect any tool with a dust collection port, from your hand-held sander to your stationary cabinet saw, to iVAC's system and breathe easier! At the heart of iVAC's system is the Pro Switch, which automatically activates your shop vacuum or dust collector when you turn on a power tool that is connected to the system. Each power tool connects to the dust collection system via a Pro Tool Plus automatic sensor (one per tool). The Pro Tool Plus senses tool power via the magnetic field surrounding the tool's power cord and then communicates with the Pro Switch via a wireless signal to turn on the vacuum or dust collector. Each Pro Switch can receive signals from up to 8 power tools.</p> <p> System set-up is simple! Just plug the Pro Switch in to an outlet and plug the shop vacuum or dust collector in to the switch. The Pro Tool Plus unit attaches to the power tool cord (works with power cable, metal clad cable and steel conduit) with a screw-down clamp. Position the Pro Tool Plus in such a way to receive the strongeset signal from the power tool and tighten the screws on the clamp. Once you connect your power tool to your shop vacuum or dust collector, you are ready to go! The iVAC Basic 3-Tool Kit is intended for smaller home workshops that run on standard 15-20amp 115-volt service and for vacuums of up to 1.5 HP, and includes the following:
- One (1) iVAC Pro Switch S11520-A-NA (runs on 20-amp, 115-volt service and comes with an adaptor for 15-amp service; each Pro Switch can receive signals from up to 8 different tools)
- Three (3) iVAC Pro Tool Plus TP-NA units
